View CEP-1136_4993116.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Part No: CEP-1136 Description: piezo audio indicator
Date: 6/25/2007 Unit: mm Page No: 1 of 4
Specifications
Operating frequency Operating voltage Operating current Sound pressure level Rated voltage Tone Operating temperature Storage temperature Dimensions Weight Material Terminal RoHS 2.8 0.5 KHz 3 ~ 28 7 mA max. at 12 V dc 85 db min. at 30 cm / 12 V dc 12 V dc Continuous -30 ~ +85 C -40 ~ +95 C o41.8 x H16.0 mm 12.6 g max. ABS UL-94 1/16" HB High Heat (Black) Wire type no
Appearance Drawing
Tolerance: 0.5
red wire ---M blue wire ---F black wire ---G
Phone: 800.275.4899
Fax: 503.612.2381
www.cui.com
20050 SW 112th Ave.
Tualatin, OR 97062
Part No: CEP-1136 Description: piezo audio indicator
Date: 6/25/2007 Unit: mm Page No: 2 of 4
Measurement Method
M = Red wire F = Blue wire G = Black wire
Phone: 800.275.4899
Fax: 503.612.2381
www.cui.com
20050 SW 112th Ave.
Tualatin, OR 97062
Part No: CEP-1136 Description: piezo audio indicator
Date: 6/25/2007 Unit: mm Page No: 3 of 4
Mechanical Characteristics
Item Solderability Test Condition Stripped wires of lead wires are immersed in rosin for 5 seconds and then immersed in solder bath of 230 5C for 3 0.5 seconds. Stripped wires are immersed up to 1.5mm from insulation in solder bath of 300 5C for 3 0.5 or 260 5C for 10 1 seconds. The pull force should be applied to lead wire: Horizontal 3.0N Vertical 2.0N The buzzer should be measured after applying a vibration amplitude of 1.5 mm with 10 to 55 Hz band of vibration frequency to each of the 3 perpendicular directions for 2 hours. The part will be dropped from a height of 75 cm onto a 40 mm thick wooden board 3 times in 3 axes (X, Y, Z) for a total of 9 drops. Evaluation Standard 90% min. of the stripped wires will be wet with solder. (Except the edge of the terminal) No interference in operation.
Soldering Heat Resistance
Terminal Mechanical Strength
No damage or cutting off. The value of oscillation frequency/current consumption should be 10% of the initial measurements. The SPL should be within 10dB compared with the initial measurement.
Vibration
Drop Test
Environment Test
Item High temp. test Low temp. test Humidity test Temp. cycle test Test Condition After being placed in a chamber at +95C for 240 hours. After being placed in a chamber at -40C for 240 hours. After being placed in a chamber at +40C and 905% relative humidity for 240 hours. The part shall be subjected to 5 cycles. One cycle will consist of: Evaluation Standard
The buzzer will be measured after being placed at +25C for 4 hours. The value of the oscillation frequency/current consumption should be 10% compared to the initial measurements. The SPL should be within 10dB compared to the initial measurements.
Phone: 800.275.4899
Fax: 503.612.2381
www.cui.com
20050 SW 112th Ave.
Tualatin, OR 97062
Part No: CEP-1136 Description: piezo audio indicator
Date: 6/25/2007 Unit: mm Page No: 4 of 4
Reliability Test
Item Operating (Life Test) Test Condition 1. Continuous life test: The part will be subjected to 48 hours of continuous operation at +70C with rated voltage applied. 2. Intermittent life test: A duty cycle of 1 minute on, 1 minute off, a minimum of 5,000 times at room temp (+25 2C) with rated voltage applied. Evaluation Standard The buzzer will be measured after being placed at +25C for 4 hours. The value of the oscillation frequency/current consumption should be 10% compared to the initial measurements. The SPL should be within 10dB compared to the initial measurements.
Test Conditions
Standard Test Condition Judgement Test Condition a) Tempurature: +5 ~ +35C a) Tempurature: +25 2C b) Humidity: 45 - 85% b) Humidity: 60 - 70% c) Pressure: 860-1060 mbar c) Pressure: 860-1060 mbar
Packaging
Phone: 800.275.4899
Fax: 503.612.2381
www.cui.com
20050 SW 112th Ave.
Tualatin, OR 97062

▲Up To Search▲

Price & Availability of CEP-1136

	To Download CEP-1136 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .